Choose from our popular range of 11 colours below. To create a rustic, natural look, or a different border finish, combinations of these colours can be used by your applicator.
PLEASE NOTE:- Colour reproduction can vary when viewing colours on your computer screen. For an accurate representation of colour, phone 1800 077 744, 07 3287 6444 or an office near you for a copy of the CCS printed colour chart.
STYLE PAVE CONCRETE RESURFACING
The colours below can be achieved by mixing these colour concentrates with either the CCS Natural or CCS Off-white Resurfacing Compound.
(O) = CCS Off-white Resurfacing Compound
(N) = CCS Natural Resurfacing Compound
TWO PART COLOUR
CLICK THE BOTTON TO OBTAIN A DOWNLOADABLE / PRINTABLE PDF
Results of tests conducted on crushing test cubes made from CCS Colour Hardener reveal the following typical strengths:
1 Day - 28 MPA
3 Days - 45 MPA
28 Days - up to 79 MPA
The above early, as well as long term strengths ensure a strong, abrasive-resistant finish is achieved.
Abrasion resistance actually improves with sufficient application of CCS Colour Hardener (coloured pre-mix) to the surface.
The following table details the potential increases in abrasion resistance gained from applying the recommended quantities of CCS Colour Hardener.
Minimum 28 day abrasion index standard as per MA20Average abrasion index of surface finished with CCS hardener*Result
Driveways and car parks with vehicular traffic under 3 tonnes1.22.98Exceeds Standard
Public roads and industrial hardstands1.52.98Exceeds Standard
Busy shopping footpaths and malls with heavy pedestrian traffic2.02.98Exceeds Standard
*Results of tests by Queensland University of Technology conducted in accordance with Appendix D - MA 20 Abrasion Test, Specification for Concrete Segmented Paving Units. Surfaces were finished with CCS Colour Hardener at the rate of 2kg per m2.